The construction industry is a very high risk work environment, and there is a high potential for serious accidents and injuries to occur in the construction industry. Construction workers are put in dangerous situations on the job, including being dropped from great heights, being electrocuted, being exposed to harmful substances, being onjured, and having their hearing damaged. There are a lot of accidents that can happen on construction sites, and some of them can even be fatal.
It is of the utmost importance to do everything in your power to reduce the number of construction accidents that occur on your construction site. There are many potential dangers on a construction site, and there is also a high risk of being injured there. There are many positive outcomes that can result from accident prevention. It is not only your ethical obligation to do what you can to save the lives of your workers, but doing so will also bring down the cost of your insurance premiums and shorten the amount of time your business is idle. Because they will be aware that someone is looking out for their wellbeing, your workforce will experience increased levels of both productivity and morale. Your company’s reputation will improve if you maintain high standards of health and safety and take steps to reduce the number of construction accidents that occur there and the need to contact Gorayeb & Associates. This will make your company more appealing as an employer.
Reduce and avert accidents on construction sites.
The following is a list of suggestions to keep in mind in order to reduce the risk for your employees:
1) Be aware
It is difficult to avoid risks if you do not know what they are, which is why you should carry out a risk assessment before beginning work. An in-depth examination of the working environment is what is involved in a risk assessment, with the goal being to identify any hazards that could lead to injuries. If your company has more than five employees, you are required by law to conduct a risk assessment, and the results of that assessment need to be documented in writing.
After the risks have been identified through the process of risk assessment, the next step is to work out the most effective methods for mitigating those risks. From this point forward, you will be in a position to devise a strategy for the health and safety of your employees, one that will shield them from the risks that you have identified.
2) Ensure that all of your tools and machinery are kept in good condition.
It is of the utmost significance to check on the operational status of all of your machinery and other equipment. Every piece of equipment, including tools and machinery, should be subjected to routine inspections, and a record of the most recent time they were inspected or serviced should be kept in writing. It is unfortunate, but many accidents have occurred on the job because tools and equipment were not maintained properly. This has led to a number of injuries.
You should also encourage your employees to perform a quick check of the equipment or machinery before they use it, in order to ensure that it is operating correctly and that it will not break down while they are using it. Any problems that arise with the maintenance of the building must be reported to management as quickly as possible, if not immediately.
- Always maintain a clean working environment
Accidents in the construction industry are also frequently brought on by workers tripping over debris and injuring themselves as a result of falling or slipping. In order to avoid injuries that are not absolutely necessary, it is very important to keep all of the walkways clear of debris at all times. It is imperative that each and every worker is on board with this initiative, and there should be a universally acknowledged and strictly adhered to standard of cleanliness throughout the entire workplace.
When you are finished working with the tools and materials, make sure to put them all away in the appropriate location. In the event that there is a spill, it must be cleaned up immediately, and the affected area must be labelled as “Wet” until it is once again safe to walk on.
- Hold safey meetings
Your safety meetings should be as frequent as possible – perhaps even daily if you are performing high risk work such as construction on a highway. It is not sufficient for these safety meetings to consist solely of the monotonous and unoriginal act of reading safety tips from a manual. Instead, you should solicit feedback from your workforce regarding the potential hazards that they observe in the context of their specific place of employment. After that, you can collaborate with one another as a group to come up with the most effective strategy for avoiding these dangers. Information that is applied to real life and is specific to the job at hand will always be more valuable.
- Make sure everyone is wearing the appropriate safety gear
Do the employees working for you wear protective clothing and equipment that is suitable for the tasks that they are performing? Ensure that you are instructing your workers on the appropriate personal protective equipment to be worn, that you are providing this equipment to them at no cost, and that you are mandating that they wear the equipment. If PPE is uncomfortable or broken your employees will be less likely to wear it, so make sure that it fits them well and is in good condition. Encourage a culture of health and safety in the workplace by commending workers for donning the necessary protective equipment and reprimanding those who choose not to do so.
What happens if health and safety measures are not in place?
It is both a legal and moral requirement for construction company owners to develop (and enforce) health and safety measures within the workspace. Failure to do so puts your employees at risk of serious injury and even death. Not only would this damage your business reputation, but it will also result in serious legal and financial ramifications. For example, the family of the deceased will likely work with an experienced wrongful death lawyer to seek both compensation and justice.
Conversely, putting together a detailed health and safety plan can prevent these accidents and protect your business.